Exterior Decorative Wall Panel Production Line
Suitable for manufacturing metal wall panels insulated with PU/PIR foam
Our exterior decorative wall panel production line was developed in response to the needs of decorative metal wall panels with PU/PIR foam insulation, which are suitable for light gauge steel villas and home renovations due to their features of moisture resistance, thermal insulation, flame resistance, sound proofing, easy installation, and multiple appearance options.
This exterior decorative wall panel production line is consisted of uncoiler, embossing machine, roll forming machine, foaming machine, double belt (lamination machine), cutting machine and secondary coating machine. It is a one-stop solution that meets customer needs of various panel patterns, significantly saving workshop space while lowering investment cost.
Featured by high stability, the exterior decorative wall panel production line can conduct continuous production with an annual output of more than 500,000 square meters, offering rapid payback period and quick recovering of customer's investment. Due to the high level of automation on the production line, only two people are needed to operate a 50 meter long production line, greatly reducing production costs.
Samples of Finished ProductThe below data might be a little changeable upon field conditions and manpower.
Roll Forming Line | |
Coil (raw material) | Pre-painted steel sheet and Aluminium |
Coil (steel sheet) thickness | Exterior facing: 0.25-0.5mm |
Coil weight | Max. 3 ton |
Coil width | 350-550mm |
Coil inner diameter | Ø508mm |
Coil outer diameter | Max. Ø1,100mm |
Line speed | 0-10m/min (depend on foaming speed) |
Hydraulic pressure | Max. 150kg/ cm² |
Pneumatic pressure | Approx. 4-9kg/cm² |
Electric power source | 380v×50Hz (customize) |
Forming type | Flat type |
Pass line (height) | 1,100mm from floor |
Panel & Insulation | |
Panel types | Flat type |
Panel length | Min. 2,000mm Max. 6,000mm |
Panel width | Cover width: 300-500mm |
Panel thickness | Sandwich panel: 10/16mm |
Foam property | PU/ PIR rigid foam |
Foam density | Approx. 35-50kg/m3 |
Metering unit | Low pressure pump system |
PU foam poured by | Motor mixing head |